Stucco & Exterior in Pasadena
Stucco repair and restucco for Pasadena houses, run in a fixed order with openings first, including vents that may face ember-resistance rules.
Stucco work on a Pasadena house runs in a fixed order, and the first move is the wall's openings. Windows, vents and door heads get framed and flashed before any plaster is mixed. Because mapped fire hazard zones cover parts of Pasadena, a lot there may face ember-resistance rules that shape which vents and trim go in at that first stage. Color and texture are decided last.
Openings before covering
Every cut in the wall is settled first. The kitchen's hood duct, a bath fan, a new window over the sink: each is framed, wrapped in flashing and capped with its trim while the wall is still bare. A vent that may fall under ember rules gets a rated screen, chosen at this stage so it is not swapped in after the plaster cures. Lath comes next, fastened to framing, then the scratch coat, which is combed so the brown coat can grip it. Nothing cosmetic goes on until those layers sit flat and dry.
Curing, color, then cleanup
Plaster needs time between coats to cure, so the work spreads over several days and the finish coat is left for last. Color is mixed to a sample from the wall and judged on a dry swatch. After the finish goes on, trim paint is touched up, soil is pulled back from the bottom edge and debris is hauled off. The kitchen work and the plaster work share one schedule, which keeps a hood or a window from being set before the wall around it is ready for it.
Stucco & Exterior in Pasadena: questions to settle first
The cap is set while the wall is still open to the framing. A box frames the hole, the flange's top edge goes up under the building paper while its bottom edge rides over the sheet beneath, and sealant rings the rim before plaster closes the gap. Near a mapped fire hazard area, the cap and neighboring vents may also need an ember screen.
Narrow, dry cracks take a patch. Tired color on sound plaster takes a recoat. Rust stains, hollow plaster or damp sheathing mean that wall gets rebuilt. A wall caught between those cases gets a small test opening, and photos of what it shows go with the scope.
A sample is taken from a spot on the wall that matches the rest and mixed up as a swatch. The swatch is checked once dry, since plaster lightens as it cures. The new coat is then carried to a corner or trim edge, where a change in tone reads as a natural break.
Stucco & Exterior in other cities
More work we plan in Pasadena
Start your stucco & exterior plan in Pasadena
Describe the space and the change you want. We reply with what the first visit covers.