Remodeling in Temple City, Los Angeles County
Kitchen Remodeling in Temple City
Navon Home begins a Temple City kitchen remodel in the attic: joists, duct route, wiring and insulation are checked before the layout and finishes are set.
On a Temple City kitchen visit, the attic hatch comes open before the cabinet doors do. From above the ceiling we see which way the joists run, whether old wiring is spliced loose or tucked into boxes, how deep the insulation sits and where a hood duct could rise to the roof. Those findings shape where recessed lights can go and which wall the range can face, so the layout is drawn after that look.
A route for the hood and room for lights
A hood moves air well through a short, straight duct of the size its maker lists. Up in the attic we look for a clear path between joists to a roof cap, away from trusses that cannot be cut. If no clean route exists over the planned range spot, the range may shift or the hood may vent through a wall. Recessed fixtures need room between framing members and a rating for contact with insulation. Where joists are shallow, slim LED wafers fit without cutting into the structure, and the lighting plan follows what the attic allows.
Wiring and insulation found overhead
Cloth-covered conductors, splices without a box or a circuit that also feeds other rooms are each reason enough for the kitchen wiring to be replaced back to the panel. Any of those findings becomes a line in the quote before work starts. Insulation disturbed by new fixtures or a duct is restored, and gaps around the opening for a hood get sealed so attic air stays out of the room. The building department serving Temple City reviews the drawings, and an inspector checks the new circuits and duct before the ceiling is patched and painted.
What we plan and build in Temple City
Every project here starts the same way: a measured layout, then the lines behind the walls, then finishes.
Cities close by
Planning a kitchen in Temple City?
Send a few lines about the room. We reply with the next step for a design visit.