Full Home Remodeling in Simi Valley
The order of a Simi Valley whole-house remodel: shutoffs and circuits mapped first, a temporary kitchen next, then demolition, rough work and finishes.
Before a wall is touched in a Simi Valley whole-house remodel, every shutoff valve gets tagged and every breaker gets a label, because demolition cuts into lines nobody has traced. That mapping comes first, then a temporary kitchen is set up, then the old kitchen comes out. Fire hazard zones are mapped across parts of Simi Valley, so the roof, vents and eaves are checked early, since ember rules can affect them.
From mapping to demolition
With the lines mapped, the house is protected: floors covered, doorways sealed and the work zone separated from the rooms in use. The temporary kitchen goes in next. Demolition then proceeds from the kitchen outward, because its plumbing, gas and wiring are the first to be redesigned, and early framing changes there set the heights and positions for every other room. Dumpster placement and a path for debris are decided before the first wall comes down, and the neighbors' access is kept clear.
Rough work, inspections, finishes
Once the walls are open, framing changes go first with an engineer sizing any beam, then drain and supply piping, gas, electrical and ducts. Each inspection is passed before insulation goes in. If the lot is in a mapped hazard area, attic and crawlspace vents are swapped for ember-resistant types while the structure is open. Drywall follows, then flooring, cabinets, counters, trim and paint, and a final inspection closes out the permit once every room is complete. Appliances are set last, so they are spared the damage that work around them can cause.
Full Home Remodeling in Simi Valley: questions to settle first
Mapping of shutoffs and circuits, protection and a temporary kitchen lead off. Demolition and framing follow, then plumbing, gas, electrical and ducts, with inspections before anything closes. Drywall, floors, cabinets, counters and paint complete the sequence.
Often it can. Roof or ceiling framing resting on that wall calls for an engineer to size the replacement beam. A wall serving only as a room divider just needs the services inside it moved out first. The city building department reviews the result, and a test opening at the top plate settles which case applies.
Fixture and appliance choices that set rough plumbing and gas. Walls that move. Window and door sizes. Flooring heights. Light and outlet positions. Roof covering and attic vents, which may face ember-resistance rules where the parcel is mapped as a fire hazard.
Full Home Remodeling in other cities
More work we plan in Simi Valley
Start your full home remodeling plan in Simi Valley
Describe the space and the change you want. We reply with what the first visit covers.