Oak Park Kitchen Remodeling With Metal Duct and Caps

Oak Park kitchen remodels with metal hood duct and a damper cap, ember-resistant where lots are mapped, plus heat-tolerant surfaces at the range.

Tell us about the kitchen

By sending, you agree Navon Home may contact you by call or email about your request. Consent isn't required to buy. Privacy Policy

Metal is what we specify for the hood duct and its cap in an Oak Park kitchen. A galvanized or stainless duct carries grease-laden air without softening, and a metal cap with a tight damper keeps out wind-blown debris and, on a lot inside a fire hazard map, embers. Plastic or foil flex duct has no place in a kitchen exhaust run.

Duct material and joints

Kitchen exhaust duct is smooth metal so grease cannot gather in ridges. Joints are lapped in the direction of airflow and sealed with foil tape, never with cloth duct tape, which dries out and lets go. Where the duct passes through an unconditioned attic, it is wrapped with insulation to limit condensation inside. Screws are kept short so they do not snag grease, and the run is supported every few feet so it cannot sag. An access point near the hood makes the duct easy to inspect later.

Caps, counters and backsplash

The cap on the wall or roof is matched to the duct size and has a damper that falls shut once the fan is off. A mapped fire hazard lot can call for a cap built to resist embers, and Ventura County reviews outside openings on such lots. Inside, the backsplash behind the range is a noncombustible tile or stone, and the counter beside the cooktop is a heat-tolerant stone or porcelain, so a hot pan has a safe place to land.

About kitchen remodelingRemodeling in Oak Park

Kitchen Remodeling in Oak Park: questions to settle first

Start your kitchen remodeling plan in Oak Park

Describe the space and the change you want. We reply with what the first visit covers.