Flooring, Drywall & Interior Finishes in Sunland-Tujunga
Sunland-Tujunga drywall and flooring quoted after a look behind a switch plate: plaster or board, layer depth and wiring are known before any patch plan.
A switch plate comes off first on a Sunland-Tujunga visit. The gap around the box shows whether the walls are plaster on lath or gypsum board, how thick the layers run and whether earlier patches stacked one finish on another. That small look decides how a patch is built and how texture is matched, and it tells us whether a wiring change behind the wall means a permit before board closes.
Reading the wall at the box
Plaster on wood lath shows as a hard, thick layer with gaps behind it, and a patch there needs the lath secured and the depth built up so new board sits flush. Gypsum board shows a paper face and a chalky core, so a patch is a matching piece cut to fit. Old cable with a fabric jacket, or a box with no ground, goes to an electrician before any wall is closed. Texture is sampled on a spare section of wall so the repair blends in, and the quote lists patching by wall type, since plaster takes more steps.
Ceilings, floors and the fire map
Ceilings get the same early look through the attic hatch: framing, insulation and any old water stain on the back of the board. On the floor side, a loose corner of the old covering gets lifted to see what lies beneath. Sunland-Tujunga includes land on fire hazard maps. Where a lot falls on one, vents, eaves and exterior doors touched by the job can face ember-resistance requirements, so those pieces are quoted apart. Permitted work goes through LADBS, because Sunland-Tujunga is part of the City of Los Angeles.
About flooring, drywall & interior finishesRemodeling in Sunland-Tujunga
Flooring, Drywall & Interior Finishes in Sunland-Tujunga: questions to settle first
Where tile goes down first, the cabinets can sit on it and the dishwasher gets a tall enough opening. Click plank floats, so it halts at the cabinet face with its gap. In a Sunland-Tujunga kitchen with plaster walls, the floor is chosen before patching starts, since the base trim has to cover whatever gap the floor leaves at a wall that may be out of plumb.
After the switch plate, the floor: we read the slab or plywood with a meter, run a straightedge across the room and press on any spot that feels soft. A raised floor gets a crawlspace look at the joists and sheathing. Each finding goes into the Sunland-Tujunga quote with its fix spelled out.
Yes. Electrical changes found at the box are made and inspected, the walls are patched and textured, and the floor goes down once sanding is over. Cabinets fall before or after the floor based on its type, and touch-up paint is the last item on the Sunland-Tujunga schedule.
Flooring, Drywall & Interior Finishes in other cities
More work we plan in Sunland-Tujunga
Start your flooring, drywall & interior finishes plan in Sunland-Tujunga
Describe the space and the change you want. We reply with what the first visit covers.