Flooring, Drywall & Interior Finishes in Claremont
Glass-mat board for the walls around a Claremont kitchen sink, dishwasher and range, where steam and splashes reach the surface.
Paper is food for mold, and standard drywall is wrapped in it. In a Claremont kitchen, glass-mat board with a fiberglass face is the pick for walls near the sink, range hood and dishwasher, where steam and a stray splash reach the surface. It gives the wall a skin that tolerates damp, and the rest of the room keeps standard board.
Where glass-mat goes
Glass-mat panels go on the wall behind the sink, around the dishwasher gap, beside the range where steam drifts past the hood, and on the lower course of walls in any adjoining laundry or bath. The gypsum core is treated and the faces are glass fiber, so mold has little to eat and water does not turn the board to pulp. The panels cut and screw like regular board. Joints get mesh tape and a setting compound that cures by chemical reaction.
Finishing it right
Glass-mat surfaces take paint, tile or a backsplash with the right primer. Paint is a washable satin or semigloss, and the backsplash adhesive is checked against the board maker's list. Because the panels tolerate damp, a weeping supply line still gets repaired first. Cut edges near wet spots get a bead of sealant. Away from water, regular board stays on the rest of the walls, so the extra material goes only where it earns its place. The quote lists the board types by wall location.
About flooring, drywall & interior finishesRemodeling in Claremont
Flooring, Drywall & Interior Finishes in Claremont: questions to settle first
Tile can sit beneath the cabinet bases, and floating planks can end at them. Board that tolerates damp near the sink does not change this, though appliance clearances do. Those are checked against the finished floor thickness, and the choice is made on the drawings.
The low spots show under a straightedge and level, a meter checks the wood for damp, and a screwdriver tests soft areas. In the kitchen, the wall bottoms beside the sink and dishwasher are metered too, because that is where board shows damage first. All of it goes into the quote.
Usually, once the rough-in work has passed. Wet-area walls get glass-mat board and are finished, the floor goes in next and the cabinets follow. The written schedule shows each hold, so the room is handed on when it is ready.
More work we plan in Claremont
Start your flooring, drywall & interior finishes plan in Claremont
Describe the space and the change you want. We reply with what the first visit covers.