Flooring, Drywall & Interior Finishes in Bel Air
Bel Air floor projects start at the stairs: riser heights measured first so a new floor keeps every step even, with walls and ceilings finished to match.
Where a Bel Air house has a stair, it gets measured before anything else on a floor visit. A new floor that reaches a stair adds thickness at the top or bottom step and leaves the others as they were, and the code holds the risers in a flight to nearly equal heights. So before samples come out, we record each riser and landing, the build-up the chosen floor would add and how the kitchen floor meets the hall.
Keeping every step even
California's residential code allows only a 3/8 inch difference between the tallest and shortest riser in a flight. Any change in floor thickness at the top or bottom of the stair changes the riser there, so we work it out on paper first: remove old layers, choose a thinner product near the stair, or rebuild the treads and nosings so the flight comes out even. A stair finished in wood to match the hall gets nosings sized to the new floor, and the transition sits flush at the landing so nothing catches a heel.
Walls once the floor plan is set
With the heights settled, drywall comes next. Ceilings opened for new lighting in the kitchen and hall are patched and textured to match, stair walls get solid blocking where a handrail bracket will land, and outside corners take a bead set in compound. Bel Air is in the City of Los Angeles, so LADBS inspects any open framing, wiring or plumbing before board closes. Some of Bel Air lies inside a mapped fire hazard zone, a point that touches a lot there once the work reaches the exterior.
About flooring, drywall & interior finishesRemodeling in Bel Air
Flooring, Drywall & Interior Finishes in Bel Air: questions to settle first
Whichever way it goes, the floor height at the dishwasher and range is matched to the stair plan, since both come from the same layer count. Tile and glued wood can carry on beneath the cabinets, and a plank floor that floats is trimmed short of them. In a Bel Air kitchen that opens to a stair, both are drawn on one sheet.
After the old floor is lifted, a long level shows dips and crowns, a probe finds soft plywood, and a meter reads moisture on a slab. Stair landings and treads get the same check, because a soft landing can crack a new transition. Each repair is listed in the Bel Air quote.
Yes, as one sequence. Kitchen rough work and any stair framing changes are inspected together, walls close, and floors and stair finishes go in after the dust is done. One Bel Air schedule carries the kitchen, the floor, the stair and the walls in that order.
Flooring, Drywall & Interior Finishes in other cities
More work we plan in Bel Air
Start your flooring, drywall & interior finishes plan in Bel Air
Describe the space and the change you want. We reply with what the first visit covers.