Remodeling in Canoga Park, Los Angeles County
Kitchen Remodeling in Canoga Park, Range Wall First
Navon Home plans the range wall of a Canoga Park kitchen first: hood, fuel, backsplash and the glass beside it, chosen for a warm inland room in daily use.
The range wall is where a Canoga Park kitchen remodel with us begins, since it decides the budget and schedule for the rest of the house. An inland kitchen can already be warm on a bright afternoon, and the cooktop adds its own heat and grease to that wall. So the hood, the fuel, the backsplash and any nearby window are settled on the drawing before cabinet sizes are fixed and long before finishes come up.
Fuel and air at the cooktop
Induction puts its energy into the pan, so less heat spills into the room, though it needs a dedicated circuit and sometimes a panel upgrade. A gas range needs a supply line sized to its rating and a hood that captures its larger plume. Either way the hood should be at least as wide as the cooktop and ducted outdoors through rigid metal. Canoga Park is a City of Los Angeles neighborhood, so LADBS reviews the circuit, any gas change and the duct before the walls close.
Surfaces behind and beside the range
A porcelain slab backsplash running up to the hood shrugs off heat and wipes clean in one pass, with no grout lines to stain. Stainless or enameled steel hoods hold up to grease and steam. Next to the range, a heat resistant landing surface gives hot pans somewhere to go. A window close to the cooktop needs clearance from the burners and a low emissivity coating against afternoon sun. Drywall patched around new outlets is finished smooth before paint, and porcelain tile or rigid core vinyl plank suits the floor in front of the range.
What we plan and build in Canoga Park
Every project here starts the same way: a measured layout, then the lines behind the walls, then finishes.
Cities close by
Planning a kitchen in Canoga Park?
Send a few lines about the room. We reply with the next step for a design visit.